AC100-240V 100W led flood light with IP66 waterproof rating.
1, Features:
Full waterproof design
High transmittance empered glass,transimittan 93%
The radiating area 4260cm²
Multi-Chip on lead frame,single module LED package design
System design integrating power supply,LED light engine ,and heat
sink
Over Current,Over Voltage,Over Heat,Thunder Protection
Choice of correlated color temperatures
Long lifespan for LED 50,000 hrs
Complying with CE,ROHS, No strobing during working, Fast response
(no delay) , No
mercury vapour ,No radiation,No UV,No damage with frequency
switching
IP Rating: IP66
Power supply direct touch the radiator,in light weight
2,Application area:
Replacing traditional High Pressure Sodium lamp or metal halide
lamp.
Widely used for advertise billboard ,exterior wall of hotel and
related landscape lighting
3,Product Dimension:
Attentions:
1,All dimension units are millimeters.
2,All dimension tolerance is ±1mm unless otherwise noted.
4,Product Specification:
Input voltage: AC100V～240V
Freqency range: 50HZ～60HZ
Tatal harmouic distortion: ≤9%
Power facor: ≥0.9
Power efficiency: ＞85%
Sysem consumption: 100W
LED package: Multi-chip on led frame,Single module
LED consumption: 100W
LED Working voltage: DC30～36V
LED quantity:1PCS
LED luminous: ＞12000 lm
LED luminous efficiency: 110～120 lm/W
CRI: ＞70
Facula area:
H=6m 12m×12m
H=8m 15m×15m
H=10m 18m×18m
Illuminance uniformity: ＞0.68
LED Junction temperature: ≤60℃
Operational condition: Temperature -30℃～60℃
Humidity 10%～90%RH
Storage temperature: -40℃～85℃
Working life-span: ＞50,000H
Connect wire: Brown-L Blue-N Yellow/Green-G
Beam angle: 120°
IP Grad: IP66
Housing: Aluminum
Mounting Height: Suitable for 8～10m height
5,Connect wire:
Blue—Neutral
Brown—Line
Yellow/Green—Ground
6,Package:
1 Carton = 1 Set Size: 510mm×430mm×135mm 5.6Kg
7,Installation:
Installation tool: A adjustable wrench group.
Installation Steps:
① Tighten Axle Screw, and Locate Screw
② Connecting the power line of LED Flood Light to the power
supplier ,finish the installation procedure
The installation notices:
① No necessary using other devices for LED Flood light installation
such as stabilizer, regulator and so on
② Opening the light and lifting the buckle is unallowable. Soaking
in the water is unallowable
8,Warning:
Do Not Use Other Devices for LED Floodlight Installation Such as
Stabilizer,
Regulator …etc
Do Not Open the Light Engine
Do Not Soak the Floodlight into Water
Do Not Light up the System Without Grounding
Do Not Use Dimmer
9,Warranty:
3 Years Warranty Starts from Taking Delivery of Goods a Day. The
Warranty Content
Includes the Damage of All Components, Such as LED Light Source and
Power
Supply...etc.
The Floodlight Must Operate at the Common Normal Environment. As in
Order to
be Faced by the Sea Road in 3 Kilometers or to Use in the Bad
Environment Such as Tunnel, Warranty Period is Within 1 Year.
The Calculation of Warranty Period with Turn on the Light for a Day
8-10 Hours is Limited. As Everyday Longer Than 10 Hours, Then
Gradually Decrease According to Comparison Warranty Time Limit.
